Factory-Direct Catalog
Featured Architectural Aluminium & uPVC Door Systems
Engineered to exceed AGWA AS2047, NZS4211, NAFS, and Miami-Dade structural standards for high-density residential and commercial developments.
Customization Large Aluminum Sliding Window Stainless Steel Mesh Double Glazed Tempered Hurricane Impact Resistant Window
Inquire Now
Modern Design Interior Door Aluminum Frame Tempered Glass/Frosted Glass Doors for Kitchen/Bathroom
Inquire Now
NFRC Thermal Break Aluminum Folding Door Aluminum Large Folding Patio Doors Exterior with Retractable Insect Screen
Inquire Now
Customized Aluminium Fixed House Window Double Glass Design Large Sliding windows for Porch Balcony Fixed Window for Sale
Inquire Now
EOKO Residential Bifold Folding Door Low-E Glass Aluminum Bi Folding Accordion Bifold Exterior Door For Construction Contractors
Inquire Now
ZEKIN Modern American Design House Heat Insulation Fire Prevention Luxury Entrance Pivot Door House Front Entry Doors
Inquire Now
Aluminum Alloy Sliding Door with Three Tracks Glazed Design Screen & Mosquito Net Waterproof Modern for Living Room Interior Use
Inquire Now
Executive White Paper
Global B2B Procurement Trends in Aluminium Partition & Sliding Door Systems
An in-depth architectural report on structural engineering, decarbonization mandates, and acoustic isolation benchmarks transforming the global fenestration market.
16+
Years Manufacturing Excellence
25+
Global Export Markets
STC 42
Acoustic Isolation Rating
10-Yr
Comprehensive Warranty
1. Decarbonization & Low Carbon Aluminum Sourcing (6063-T5 / T6 Extrusions)
As international building codes (such as Australia’s NCC 2022, Europe's EPBD, and North America’s ASHRAE 90.1) tighten carbon footprint compliance, major procurement officers and tier-1 general contractors are abandoning traditional, non-thermally broken profiles. Modern commercial projects require primary billet aluminum extrusions composed of Al-Mg-Si 6063-T5 or T6 alloy with strict control over chemical impurities.
SAGA integrates low-carbon primary aluminum billets combined with advanced PA66GF25 (Polyamide 66 with 25% Glass Fiber reinforcement) thermal barrier strips. This structural configuration drastically reduces U-values down to 1.4–1.8 W/m²K, preventing thermal bridging in extreme warm or freezing climates while maintaining structural stability under heavy wind loads.
Ultra-Slim Sightlines & Heavy Sash Capacity
Architectural trends favor invisible framing with maximum glass area. SAGA’s ultra-slim sliding door series engineered with interlock stiles as narrow as 20mm can accommodate panel weights up to 400 kg via heavy-duty stainless steel 316 tandem rollers, providing effortless sliding motion across expansive spans.
Acoustic Micro-Climate Isolation (STC 40+)
Urban high-density housing demands exceptional interior soundproofing. By combining double-glazed toughened laminated glass (e.g., 6mm Low-E + 12Ar + 6mm Laminated Sound-Stop) with multi-channel EPDM weather seals, our acoustic interior and exterior partitions attenuate airborne noise up to 42 dB.
Concealed Drainage & High-Pressure Water Tightness
Our heavy-duty multi-track sliding series features hidden sub-sill drainage paths equipped with anti-backflow gravity valves. Tested under extreme artificial rain conditions, the system resists water penetration up to 600 Pa, eliminating water ingress during typhoon seasons.
Material Science & Innovation
Aluminium Partition Sliding Door Technological Innovations
Discover how proprietary profile geometry, surface treatment technology, and hardware integration establish higher quality thresholds for commercial door exports.
Qualicoat Seaside Powder Coating & PVDF Finishes
For coastal building projects exposed to harsh salt mist and UV degradation, surface treatment durability is vital. SAGA utilizes certified AkzoNobel and PPG powder coatings compliant with Qualicoat Class 2 standards, as well as 3-coat Fluorocarbon (PVDF) finishes. This ensures color retention, salt-spray resistance exceeding 3,000 hours, and zero chalking over multi-decade cycles.
Multi-Track Monorail, Dual-Rail & Triple-Rail Versatility
Flexibility in space division is achieved through engineered track profiles. SAGA produces customized 2-track, 3-track, and 4-track sliding partition configurations with integrated fly-screens or high-clarity stainless steel security mesh (304 grade, 0.8mm wire diameter). Stainless steel tracks prevent flat-spot roller damage and deliver silent operation.
Structural Silicone Glazing (SSG) & Corner Crimping
Structural integrity depends on corner assembly precision. Our factory employs automated CNC corner-crimping machines injected with two-component polyurethane corner glue (Kömmerling / Weiss Chemtech). This ensures absolute 90-degree frame rigidity, zero joint gap distortion during ocean freight transit, and long-term air tightness under building movement.
International Performance Standard Benchmark Matrix
How SAGA custom aluminium sliding doors perform across accredited third-party international testing frameworks.
| Target Region | Accredited Standard | Structural Wind Pressure | Water Penetration Resistance | Air Infiltration Rating |
|---|---|---|---|---|
| Australia & New Zealand | AS2047:2014 / NZS4211:2008 | Serviceability: 3000 Pa Ultimate: 4500 Pa |
600 Pa (High Exposure) | < 0.5 L/s·m² (Air-Conditioned Space) |
| North America (USA/CAN) | NAFS (AAMA/WDMA/CSA 101) | Design Pressure (DP): 50-70 psf | 7.5 psf to 12 psf | Class A3 Leakage Standard |
| Florida / Caribbean | Miami-Dade TAS 201/202/203 | Impact Load: Large Missile Level D | Structural Cyclic Pressure: 90 psf | Hurricane Wind Resistance > 165 mph |
| European Union (EU) | EN 14351-1 (CE Mark) | Class C5 Wind Resistance | Class E900 Watertightness | Class 4 Air Permeability |
Factory Advantage
Why Tier-1 Importers & Contractors Partner with SAGA
From technical CAD section drawings to full-scale pre-shipment mock-up trials, our factory guarantees risk-free OEM/ODM execution for major project buyers.
Complete Engineering & Shop Drawing Support
Before production starts, our fenestration engineers generate comprehensive 2D CAD section details, structural calculation reports, and 3D installation BIM models. This ensures seamless approval by local building certifiers and council authorities.
Strict Pre-Shipment Pre-Assembly Testing
100% of custom orders undergo factory dry-fit assembly. We inspect frame squareness, track sliding smooth action, multi-point lock alignment, and corner gasket sealing before packing into heavy-duty reinforced wooden crates with protective film.
Strategic Export Logistics (Fuzhou & Xiamen Ports)
Situated in Fujian Province, SAGA operates within immediate proximity to Fuzhou and Xiamen deep-water container ports. This geographic advantage grants direct ocean shipping routes to major international ports in Australia, North America, Europe, and the Middle East, reducing shipping lead times and freight costs.
Procurement Guide
Frequently Asked Questions for Wholesale & Project Buyers
Clear technical answers addressing lead times, compliance, custom profile extrusions, minimum order quantities, and shipping logistics.
Q1: Which buyer segments does SAGA cater to in global export markets?
We supply directly to window and door wholesalers, regional distributors, commercial construction contractors, real estate project developers, architectural firms, and high-end residential custom builders. Every project is assigned dedicated technical drawings tailored to local building codes.
Q2: What is the typical factory production lead time for custom aluminium partition sliding doors?
Standard production lead time is 35 to 50 days following final CAD shop drawing sign-off and deposit receipt. For complex anodized finishes or special custom die profile extrusions, lead times may extend by 7–10 days. Ocean freight delivery time depends on destination port logistics.
Q3: Can SAGA supply custom aluminum extrusion profile samples and corner mock-ups for architectural sign-off?
Yes. We provide sample corner cuts demonstrating profile wall thickness, thermal break assembly, glazing beads, and surface finishes free of charge. Freight charges are covered by the buyer and credited upon full container order confirmation.
Q4: How does SAGA ensure compliance with Australian Standards (AS2047 / AS1288) and New Zealand Code (NZS4211)?
Our products are independently audited and certified under the AGWA (Australian Glass and Window Association) program. Test reports cover structural wind deflection, water penetration, air infiltration, and safety glass compliance in accordance with NCC 2022 and NZ Building Code clauses B1, B2, E2, F2, G4, G7, and H1.
Q5: What hardware brands are integrated into your aluminium sliding door systems?
We supply top-tier international hardware options including German ROTO, Siegenia, and HOPO, alongside premium Asian brands such as Kinlong. Hardware options include multi-point flush locks, lift-and-slide gearboxes, heavy-duty stainless steel rollers, and child-safety restrictors.
Q6: What glass configurations are available for acoustic and energy performance customization?
We offer double and triple insulated glass units (IGU), Low-E coatings (Single, Double, and Triple Silver Low-E), argon gas filling, toughened safety glass, laminated soundproof interlayers (PVB / SGP), tinted glass, frosted privacy glass, and integral motorized blinds.
Q7: What packaging method is used to protect glass doors during international ocean transit?
Products are wrapped in protective scratch-resistant film, padded with corner foam guards, separated by cork pads, and packed inside fully enclosed fumigated plywood crates. Crates feature bottom pallet bases designed for safe forklift unloading at job sites.
Q8: What are the supported payment terms and ports of loading?
We support T/T (Telegraphic Transfer) bank payments and Alibaba Trade Assurance for order security. Cargo is loaded and shipped directly from Fuzhou Port or Xiamen Port in Fujian, China.